Cisco 3750 - Adding route-map to vlan interface for policy based routing ========================================================================= ******************************************************************************** ### Adding route-map to vlan conf t interface vlan 203 ip policy route-map AT end ******************************************************************************** ### But it is not working Cisco-3750# sh run int vlan 203 Building configuration... Current configuration : 293 bytes ! interface Vlan203 ip address 172.31.31.25 255.255.255.248 end ******************************************************************************** ### Checking SDM (Switch Database Management) Cisco-3750# show sdm prefer The current template is "desktop default" template. ******************************************************************************** ### Enable SDM Routing Template conf t sdm prefer routing end wri mem reload ******************************************************************************** ### Checking SDM again Cisco-3750#sh sdm prefer The current template is "desktop routing" template. ******************************************************************************** ### Adding route-map to vlan again conf t interface vlan 203 ip policy route-map AT end ******************************************************************************** ### Now it is working Cisco-3750#sh run int vlan 203 Building configuration... Current configuration : 317 bytes ! interface Vlan203 ip address 172.31.31.25 255.255.255.248 ip policy route-map AT end ******************************************************************************** ### If you want to restore default sdm no sdm prefer ******************************************************************************** _BY: Pejman Moghadam_ _TAG: catalyst-3750, sdm, vlan, route-map, policy-route_ _DATE: 2014-01-06 23:33:33_