Cisco 2811 - PPPOE Client ========================= Public domain ******************************************************************************** Building configuration... Current configuration : 1398 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! enable secret 5 ******************************** ! no aaa new-model ! ! ip cef ! ! multilink bundle-name authenticated vpdn enable ! vpdn-group 1 request-dialin protocol pppoe l2tp tunnel receive-window 1024 ! ! ! ! archive log config hidekeys ! ! ! ! ! interface FastEthernet0/0 no ip address no ip mroute-cache duplex auto speed auto pppoe-client dial-pool-number 1 ! interface FastEthernet0/1 ip address 192.168.0.1 255.255.255.0 ip nat inside ip virtual-reassembly duplex auto speed auto ! interface Dialer1 ip address negotiated ip mtu 1492 ip nat outside ip virtual-reassembly encapsulation ppp ip tcp adjust-mss 1452 no ip mroute-cache dialer pool 1 dialer-group 1 no cdp enable ppp authentication chap pap callin ppp chap password 0 ppp pap sent-username password 0 ppp ipcp dns request accept ppp ipcp route default ppp ipcp address accept ! ip forward-protocol nd ! ! no ip http server ip nat inside source list 10 interface Dialer1 overload ! access-list 10 permit 192.168.0.0 0.0.0.255 dialer-list 1 protocol ip permit ! ! control-plane ! ! line con 0 line aux 0 line vty 0 4 password ***************** login ! scheduler allocate 20000 1000 ! end ******************************************************************************** _BY: Pejman Moghadam_ _TAG: cisco2811, pppoe-client_ _DATE: 2010-01-10 10:58:35_