Cisco AS5300 - IOS upgrade procedure
====================================

Public domain
********************************************************************************
    
    1- Establish a Console Session with the router.
    2- Verify that the TFTP Server has IP Connectivity to the router.
    3- Copy the new image into the Flash Memory through the TFTP Server :
    
      AS5300>enable
      Password : xxxxx
      AS5300#copy tftp flash
      Address or name of remote host []? 10.10.10.2
      Source filename []? c5300-is-mz.123-12a.bin
      Destination filename [c5300-is-mz.123-12a.bin]?
      Accessing tftp://10.10.10.2/c5300-is-mz.123-12a.bin...
      Erase flash: before copying? [confirm]y
      Erasing the flash filesystem will remove all files! Continue? [confirm]y
    
    4- The value of the config-register must be 0x2102 check with "show version" and if it's not :
    
      AS5300#configure terminal
      Enter configuration commands, one per line. End with CNTL/Z.
      AS5300(config)#config-register 0x2102
      AS5300(config)#^Z
    
    5- If the first file in the Flash is not the Cisco IOS Software image:
    
      AS5300#configure terminal
      Enter configuration commands, one per line. End with CNTL/Z.
      AS5300(config)#no boot system
      AS5300(config)#boot system flash c5300-is-mz.123-12a.bin
      AS5300(config)#^Z
    
    6- reload ( save config )
    7- check with "show version" 
    
********************************************************************************
_BY: Pejman Moghadam_  
_TAG: as5300, ios_  
_DATE: 2007-07-12 11:34:03_