Slackware 12.0 - Installaing FreeRadius 1.1.7
=============================================

Public domain
********************************************************************************
### Installation

    cd /usr/src
    wget ftp://ftp.freeradius.org/pub/radius/freeradius-1.1.7.tar.gz
    tar -zxf freeradius-1.1.7.tar.gz
    cd freeradius-1.1.7
    ./configure --prefix=/usr/local/freeradius
    make && make install 
    ln -sfn /usr/local/freeradius/etc/raddb /etc/raddb
    cp  /usr/local/freeradius/etc/raddb/users{,.bak}
    egrep -v '^#|^ *$' /usr/local/freeradius/etc/raddb/users.bak  > /usr/local/freeradius/etc/raddb/users
    cp /usr/local/freeradius/etc/raddb/radiusd.conf{,.bak}
    cd /usr/local/freeradius/etc/raddb/
    sed -e 's,#.*,,' -e 's,^[ \t]*$,,' radiusd.conf.bak | egrep -v '^ *$' > radiusd.conf

********************************************************************************
### /etc/ld.so.conf

    /usr/local/freeradius/lib

********************************************************************************
### /usr/local/freeradius/etc/raddb/users

        pejman User-Password := "123456"
          Service-Type = Framed-User,
          Framed-Protocol = PPP,
          Framed-IP-Address = 172.16.3.33,
          Framed-IP-Netmask = 255.255.255.0,
          Framed-Routing = Broadcast-Listen,
          Framed-Filter-Id = "std.ppp",
          Framed-MTU = 1500,
          Framed-Compression = Van-Jacobsen-TCP-IP

        DEFAULT Auth-Type = System
          Fall-Through = 1

        DEFAULT Service-Type == Framed-User
          Framed-IP-Address = 255.255.255.254,
          Framed-MTU = 576,
          Service-Type = Framed-User,
          Fall-Through = Yes

        DEFAULT Framed-Protocol == PPP
          Framed-Protocol = PPP,
          Framed-Compression = Van-Jacobson-TCP-IP

        DEFAULT Hint == "CSLIP"
          Framed-Protocol = SLIP,
          Framed-Compression = Van-Jacobson-TCP-IP

        DEFAULT Hint == "SLIP"
          Framed-Protocol = SLIP

********************************************************************************
### Startup

    ldconfig
    /usr/local/freeradius/sbin/radiusd

********************************************************************************
### Debug Mode

    /usr/local/freeradius/sbin/radiusd -X

********************************************************************************
### radclient

    # echo User-Name = "pejman", User-Password = "123456" | /usr/local/freeradius/bin/radclient 127.0.0.1 auth testing123
      Received response ID 55, code 2, length = 71
            Service-Type = Framed-User
            Framed-Protocol = PPP
            Framed-IP-Address = 172.16.3.33
            Framed-IP-Netmask = 255.255.255.0
            Framed-Routing = Broadcast-Listen
            Filter-Id = "std.ppp"
            Framed-MTU = 1500
            Framed-Compression = Van-Jacobson-TCP-IP

********************************************************************************
### radtest

    # /usr/local/freeradius/bin/radtest pejman  123456 127.0.0.1 10 testing123
    Sending Access-Request of id 2 to 127.0.0.1 port 1812
            User-Name = "pejman"
            User-Password = "123456"
            NAS-IP-Address = 255.255.255.255
            NAS-Port = 10
    rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=2, length=71
            Service-Type = Framed-User
            Framed-Protocol = PPP
            Framed-IP-Address = 172.16.3.33
            Framed-IP-Netmask = 255.255.255.0
            Framed-Routing = Broadcast-Listen
            Filter-Id = "std.ppp"
            Framed-MTU = 1500
            Framed-Compression = Van-Jacobson-TCP-IP

********************************************************************************
### Test from windows

    1- Download NTRadPing from http://www.mastersoft-group.com/download/
    2- add to /usr/local/freeradius/etc/raddb/clients.conf

      client 172.16.20.254 {
        secret = testing123
        shortname = Windows
        nastype = other
      }


********************************************************************************
### FreeRADIUS Simultaneous-Use with Cisco AS5300

      1- AS5300 config :

           snmp-server community snmp123 RO

      2- add to clients.conf :

           client 192.168.1.2 {
             secret = radsecret
             nastype = cisco
             shortname = AS5300
           }

      3- add to naspasswd :

           192.168.1.2 SNMP snmp123

********************************************************************************                                                                      
_BY: Pejman Moghadam_  
_TAG: freeradius, radius_  
_DATE: 2009-04-25 00:19:38_